Technology

Why tp link range extender no longer connected with the router?

In those days a high speed internet connection became the need of every single user. Such as in big houses the traditional router is not so capable to provide a high speed or wide range coverage. To use a high speed connection you must require full range coverage. So if your router is not able to provide you proper range then by using a tp link range extender you can easily extend the wireless range of your home network. It has many advanced features that allows you more wide range connectivity. It supports dual band frequencies of 2.4ghz and 5ghz. The MU-MIMO technology makes it more reliable to transmit the signal more faster then other repeaters.

If you wish to extend the network of your wireless router and want to enjoy a high speed connection. Then by using the tp link extender can easily access a high speed connection. The configuration process is also too simple. You just need to connect your repeater to your device and access the tplinkrepeater.net default passwordadmin login page. It will redirect you to the login portal of your repeater. The default username and password is “ADMIN” which is set defaultly. After login you can also change your login admin password and customize network name according to your choice.

Tp link range extender no longer connected

Most of the time the user’s will search for this problem. This is a common problem and there are countless reasons why we will see this kind of error. The tp-link extender provides the seamless network to the router, It just needs 10% of signal to boost the network. If any wall has been built between your room or router. Then by installing a tp link extender can easily enjoy endless streaming of a network with a high speed and blazing network. So here we are going to explain the reasons behind the problem or solutions.

  • Due to slow internet speed connection.
  • Weak signal.
  • Firmware corrupted or not updated version.
  • Network obstacles, Not installed the external antennas.
  • Not connected with DSL line or internet modem.

Place extender in range of wireless router

If your extender is not in the range of the wireless router. Then extender will not connect with the router and it will show you an error. In order to fix the issue you must place your extender near to the wireless router. The low range issue can also be ensured by checking the LED indicators of your range extender. If your router is not connected with the tp link range extender you can directly connect the extender by router using an ethernet cable. Just need to insert one side of the cable into the router ethernet port and another with the extender ethernet gigabit port.

Remove network obstacles

Properly check that between your extender and the wireless router. There are not any kind of network obstacles that have been placed. Remove if there is any coin, pin, cellphone. Or any other kind of networking device. That may interrupt the wireless signal and create problems in internet connection.

Perform a hard reset

In order to fix the issue you can perform a hard reset. But be sure that after reset your extender network settings will set as default. In order to perform a reset you must connect your extender to the power source then power it “ON” Wait for sometime until the extender start work. Now simply press the reset button which is available on the back side of your extender. Press it for 15 seconds and release when the LED indicators start misbehaving. Your extender will reset automatically and all the saved settings will set as default.

Update firmware of wireless extender

Check the extender firmware. An outdated version or corrupted firmware can also create these kinds of issues. Just need to update the firmware. Open the web browser and visit the official website. In the homepage click the firmware section. Select your model number and download it.

In the same way open the admin center of your extender and click to the device management. Simply select the firmware option. Then click to update, Your extender will automatically restart during updating the firmware.

Keep in mind – Before downloading the firmware file you must check your device model number. A wrong update can create a major problem.

So these are some simple and easy steps. If still the problem is not solved you need to check the hardware problem. There may be chances that your extender is damaged physically. Replace it with a new one.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button